Outdoor garden hose pipe bonding should not be carried […]
Outdoor garden hose pipe bonding should not be carried out in a high humidity environment. The operating site should be kept away from fire sources to prevent impact and direct sunlight. Chemical building materials are accepted by consumers because of their superiority over other similar products, resource saving and pollution reduction. The surface treatment of the outdoor garden hose is as follows:
Pipe bonding should not be carried out in a high humidity environment. The operating site should be kept away from fire sources to prevent impact and direct sunlight. Pipes and fittings should be cleaned with cotton or dry cloth before bonding. Keep the bonding surface of the socket and the socket clean to ensure that it is clean and free of dust and water. When the surface is stained with oil, use cotton or dry cloth to make acetone. Wipe it off with a cleaning agent; cotton or dry cloth should not be greasy or dirty; when the surface adhering material is difficult to wipe, it can be sanded with fine sandpaper.
The outdoor garden hose is suitable for the transportation of pressurized or corrosive gases and liquids, and is widely used in machinery, coal, petroleum, chemical, construction, civil and other fields. It is also widely used for watering gardens and lawns. Let's take a look at the pressure problems of outdoor garden hoses.
1. It is recommended to use outdoor garden hoses at the appropriate temperature and indicated range.
2. The hose expands and contracts with its internal pressure and temperature. Cut the hose to the required length during the trial period.
3. When applying pressure, open the valve slowly to avoid damage to the hose due to impact pressure.
4. When using negative pressure, it is necessary to select the hose according to the different use and conditions.